הפוסט New recorded DVD does not play on other DVD players הופיע לראשונה ב-xdimax.
]]>הפוסט New recorded DVD does not play on other DVD players הופיע לראשונה ב-xdimax.
]]>הפוסט What is the meaning of the light indicator הופיע לראשונה ב-xdimax.
]]>State Description
Indicator Status
NTSC (USA/Canada)
Composite (RCA)
S-Video
PAL PAL-M SECAM
Composite (RCA)
S-Video
Power Connected
Yellow-Red…….Yellow-Red……..
Video Connected
Red…Red…Red…
Yell…Yell…Yell…
Red.Red…Red.Red
Yell.Yell…Yell.Yell
Protected Video Connected
Red
Yellow
Rrrred..Rrrred
Yelllllow..Yellllow
(*) Video Connected generally means that non protected video is connected to Grex. Some types of protections may also be indicated as non protected video. It does not mean although that protection is not removed.
הפוסט What is the meaning of the light indicator הופיע לראשונה ב-xdimax.
]]>הפוסט How to check Grex FW version הופיע לראשונה ב-xdimax.
]]>הפוסט How to check Grex FW version הופיע לראשונה ב-xdimax.
]]>הפוסט How to check Grex Operational Mode הופיע לראשונה ב-xdimax.
]]>הפוסט How to check Grex Operational Mode הופיע לראשונה ב-xdimax.
]]>הפוסט What is the difference between DVD Red PRO and Grex הופיע לראשונה ב-xdimax.
]]>Features
DVD Red PRO
Grex
Analog Copy Protection (ACP) – Macrovision Level 1 (AGC), Level 2 & Level 3 (Color stripe) Removal
CGMS-A (CGMS/A) – Copy Generation Management System for Analog Video Removal
Copy protected DVD to VHS
Copy protected VHS to DVD
Copy protected DVD to DVD
Does not make any Video Signal conversions. Provides best Video quality
S-Video (SVHS) support
Smart Light Indicator
Lets you record protected TV channels from SAT/Cable Receiver, STB, PVR, DVR
Preserves Closed Caption
NTSC & PAL Support
הפוסט What is the difference between DVD Red PRO and Grex הופיע לראשונה ב-xdimax.
]]>הפוסט Why should I change operational mode הופיע לראשונה ב-xdimax.
]]>The default Operational Mode 001 that the Grex is shipped with is one that will suite all your needs.
In some special cases with specific setups we may suggest you to select different Operational Mode. You should change Grex Operational Mode only if our technical support has recommended it.
הפוסט Why should I change operational mode הופיע לראשונה ב-xdimax.
]]>הפוסט Should I disconnect power from Grex when I do not use it הופיע לראשונה ב-xdimax.
]]>הפוסט Should I disconnect power from Grex when I do not use it הופיע לראשונה ב-xdimax.
]]>הפוסט How to change Operational Mode הופיע לראשונה ב-xdimax.
]]>Take the Grex and Connect RCA Cable (not S-Video) between Grex Composite (RCA) Video Input and Composite (RCA) Video Output. In other words make loopback between RCA input and Output connectors.
STEP 2
Connect Power to Grex and wait until indicator starts to blink fast. It will continue to blink this way for about 6-7 seconds
STEP 3
After that Grex indicator will start to show one, two, three, and so on …. short blinks followed by long blink.
On the example at the right side you can see one short blink followed by long blink and after that two short blinks followed by long blink. Next the same sequence continues .
The number of short blinks is an Operational Mode number. Real Grex will have more then two possible Operational Modes
STEP 4
Once Grex indicator short blinks desired number of times (desired Operational Mode) wait the long blink to begin and while long blink is on disconnect power from Grex. Grex will stay in that Operational mode it was just before you’ve disconnected power.
You can check the new Operational Mode using instructions in “How to check Grex Operational Mode” topic above.
הפוסט How to change Operational Mode הופיע לראשונה ב-xdimax.
]]>הפוסט Is power supply adapter shipped by Dimax compatible with my country AC standards הופיע לראשונה ב-xdimax.
]]>AC Parameters
Regions & Countries
Picture
Click to Buy
110-120V
60Hz
USA, Canada, Japan, Mexico, Brazil, South America
220-240V
50Hz
United Kingdom
220-240V
50Hz
Australia, New Zealand, Asia
220-240V
50Hz
Europe, South Africa, Israel, Russia, Hong Kong, India
הפוסט Is power supply adapter shipped by Dimax compatible with my country AC standards הופיע לראשונה ב-xdimax.
]]>הפוסט Samsung DVD-VR375 הופיע לראשונה ב-xdimax.
]]>If your TV has component video input connect Samsung Y,Pb,Pr into corresponding TV Y,Pb,Pr inputs. Otherwise connect Samsung Y into TV composite video input. In this case you will get black and white picture. This is normal.
STEP 2
If your TV does not support 100Hz video you will not see stable picture. To fix it, disable progressive scan in Samsung. Go to SETUP—>Video—>Progressive—>OFF.
STEP 3
Make connection shown on the diagram.
STEP 4
On remote control press “DVD” button and then press “Input Sel.” until you see AV1 on VR375 lcd display.
STEP 5
Recording
Put DVD media into DVD driver and VHS into VCR driver. Select DVD pressing “DVD” on remote. Press “REC”. Select VCR pressing “VCR” on remote. Press “PLAY”. Now recording from VHS to DVD is in progress. You should see playback on the TV.
הפוסט Samsung DVD-VR375 הופיע לראשונה ב-xdimax.
]]>